Mill speed is planned together

​Metsä Fibre mills hold a daily morning meeting to get an overview of the situation at the mill. The meetings play an important role in mill management.

4/2022

​The most important meeting of the day starts first thing in the morning at all Metsä Fibre mills. The morning meeting is attended by a large number of employees and some partners. The content of the meeting is the same at every site.

“The morning meeting is the most important management meeting at the mill. This is where we collect      information, get an overall picture of the situation, and agree on any measures necessary,” says Erkka Tahvanainen, Vice President, Production Development.

The mill’s indicators for safety, environmental matters, quality and production, and any aberrations are on the agenda at the meetings. Each department’s situation and any maintenance challenges are discussed.
 
“At the mill, the departments operate symbiotically, and an aberration in one department can affect the running of the whole mill. The morning meeting is attended by all the key people involved in the day-to-day running of the mill and partners in areas such as maintenance. The meeting is a forum for sharing important information about the situation at the mill and for finding solutions to potential problems,” says Niko Tuhkanen, Operations Manager at the Joutseno pulp mill.

During the Covid-19 pandemic, daily meetings have been held via the MS Teams communications platform. This has enabled wider employee participation than before. Tuhkanen himself chairs the meetings in Joutseno.

“Now that we no longer have to attend meetings in a specific room, we have also been able to involve control room employees more widely. We have a huge amount of expertise in the control rooms to run the departments and deal with problem situations, so their participation in the morning meeting is very relevant,” says Tuhkanen.

Solving problems together

Although the morning meetings are a time for going over the day ahead, they also influence the mill’s performance in the longer term. 

“The information we gather is used to make the best decisions for the mill’s operations and to achieve the best results in both the short and long term. It is a tool for steering the mill’s operations as a whole,” says Tahvanainen.

Information flow is important for management. The meeting gives the personnel an idea of the overall situation and metrics of the mill, as well as information on how their own work contributes to the bigger picture. For example, any safety aberrations are immediately brought to everyone’s attention, and measures can be agreed to avoid future incidents.

 

Benefits for the customer

A well-planned daily routine at the mill has benefits that extend to the customer. A smooth production process ensures consistent product quality. In addition, no unforeseen downtime affects product availability.

“If there happen to be any slowdowns in production levels, we can plan for them so that the situation will not affect the customer. By constantly monitoring our indicators, we also ensure that product quality matches customer requirements – that is, we produce premium quality,” says Tahvanainen.

The morning meeting practice has also been commended outside the company. Metsä Fibre has been developing its operations using the international EFQM model since 2000. As part of the EFQM model, quality competitions are organised to assess the excellence of companies’ operations in various areas. The international EFQM quality competition in 2019 found the mills’ morning meetings to be one of the organisation’s key strengths.



Related articles

  • Walking in the woods

    5/2022/ Metsä Fibre

    University projects important for product development

    ​Universities and research institutions are important partners in innovation and product development processes. Cooperation is a two-way street that benefits both parties.

    Read More
  • Family-playing-game-on-wooden-terrace

    5/2022/ Sawn timber

    Pressure-impregnated wood for impressive and sustainable garden and patio structures

    ​In Europe, a comfortable garden with a patio is an essential part of a functional home. The trend is also catching on in the Nordic countries. The garden has become something people want to invest in.

    Read More
  • Gluelam beams modern building

    4/2022/ Sawn timber

    Metsä Fibre is the preferred supplier for Japanese glulam producers

    ​Glulam beams are used extensively by the Japanese building construction industry. Flexibility and durability make them ideal for earthquake-prone areas.

    Read More
  • Joutseno morning meeting

    4/2022/ Pulp

    Mill speed is planned together

    ​Metsä Fibre mills hold a daily morning meeting to get an overview of the situation at the mill. The meetings play an important role in mill management.

    Read More
  • Vilppula sawmill

    4/2022/ Metsä Fibre

    Metsä Fibre adopts the 5S method

    ​In 2020, all Metsä Fibre sawmills and pulp mills began deploying the 5S method. It is a methodology for steering daily work that gradually turns common, proven practices into standardised operating methods. Work becomes faster, more efficient and more meaningful.

    Read More
  • Bohui papermill

    4/2022/ Pulp

    Bohui Paper seeks sustainable competitive advantages

    ​One of China’s top papermakers, Bohui Paper, sees new opportunities in the shift away from plastic. It credits Metsä Fibre with inspiring its pre-sale and post-sale service.

    Read More
  • Mount Kayasan

    3/2022/ Sawn timber

    Softwood suits Japanese post and beam

    ​The traditional architecture of Japan employs the wooden post and beam structure. This construction method is used in everything from small homes and tea ceremony houses to large temples and shrines.

    Read More
  • Kemi_Q1

    3/2022/ Pulp

    VIDEO: Bioproduct mill moving to the installation phase

    ​Pile driving and earthworks are nearly complete at Metsä Fibre’s Kemi bioproduct mill. The installation of concrete elements, laying of ground slabs and mechanical installations are widely underway. As spring progresses, more and more of the site will move to the installation phase.

    Read More
  • Rauma_Q1

    3/2022/ Sawn timber

    VIDEO: Test run approaching at the Rauma sawmill

    ​The Rauma sawmill is preparing for its production test run. The buildings of the world’s most modern sawmill have been completed, installations are progressing swiftly, and systems are being tested. The production test run will begin in the spring, and production will start up in the third quarter.

    Read More
  • Toilet paper roll

    3/2022/ Pulp

    Turkey sees steep growth in pulp demand

    ​Turkish tissue paper producers are ramping up production and buying increasing amounts of pulp on the international market. Alongside domestic consumption, exports of tissue products to the neighbouring region are growing steeply.

    Read More
  • Tytti Peltonen

    3/2022/ Metsä Fibre

    Lobbying for the forest industry

    For the first time, climate change and biodiversity have been made a priority on the EU’s agenda. Current and proposed amendments to legislation will also have a considerable impact on the forest industry. Tytti Peltonen,
    Metsä Group’s VP, Corporate Affairs, at the European Union tells about her work in Brussels.

    Read More
  • Rauma sawmill loading automation

    3/2022/ Sawn timber

    Fast and safe automated loading at the Rauma sawmill

    Automated loading at Metsä Fibre’s Rauma sawmill is a first for the sawmill industry. Conventional forklift loading will become obsolete when packages of sawn timber pass through packaging and dispatch for loading onto trucks without human contact. 

    Read More
  • timber sawn

    2/2022/ Sawn timber

    Timber for Saudi construction boom

    ​Nordic wood is crucial for the quality-driven construction boom in Saudi Arabia.

    Read More
  • Timo Teras

    2/2022/ Pulp

    Finnish pulp has a bright future

    ​For more than 50 years, Timo Teräs has worked as a market researcher and consultant in the forest and pulp industries. Today he is focused on the vital solutions that that support sustainable development.

    Read More
  • 2/2022/ Metsä Fibre

    Resource efficiency and a fossil-free future

    Metsä Group’s objective is that all its production side streams will be utilised 100 per cent as either materials or energy. 

    Read More
  • 2/2022/ Metsä Fibre

    Aiming for an increasingly responsible way of working

    Metsä Fibre, as part of Metsä Group, implements a large-scale ethics barometer survey. The goal of the survey is to study how the personnel feel the company’s Code of Conduct is being implemented in practice. 

    Read More
  • 2/2022/ Metsä Fibre

    Aiming for zero accidents

    Metsä Fibre, like the whole of Metsä Group, has the target of preventing all accidents. Safety is the most important part of professional skills at Metsä Fibre. We want to ensure that every Metsä Fibre employee and the employees of our partners are able to return from work healthy. 

    Read More
  • 2/2022/ Metsä Fibre

    Systematic reduction of water use

    Metsä Fibre’s objective is to reduce the use of process water at its pulp mills by 25 per cent per product tonne from the 2018 level by 2030, in line with the Group-wide target. 

    Read More
  • 2/2022/ Metsä Fibre

    Towards fossil-free mills

    Metsä Group’s objective is that it will no longer use any fossil fuels in its production by 2030 and will therefore not produce any fossil carbon dioxide emissions.

    Read More
  • 1/2022/ Metsä Fibre

    Targeting a sustainable supply chain

    Metsä Fibre’s goal is that all its suppliers will operate according to the environmental, social and economic responsibility requirements jointly set at Metsä Group by 2030. 

    Read More
  • 1/2022/ Metsä Fibre

    Targeting the full traceability of all raw materials

    Metsä Fibre’s objective is that 100 per cent of the raw materials used in its production would be traceable. The main raw material used in production is, of course, wood. Metsä Fibre, like the whole Metsä Group, knows the origin of the wood it uses. 

    Read More
  • 3D-rendered-consumer-packaging

    1/2022/ Pulp

    Broad partner network around Äänekoski bioproduct mill

    ​An essential part of Metsä Fibre’s unique bioproduct mill concept is the creation of industrial ecosystems.

    Read More
  • Metsä Svir sawmill

    1/2022/ Sawn timber

    Metsä Svir is known for the high-quality products

    ​The Metsä Svir sawmill in northwest Russia is a state-of-the-art production site, but timber innovation in this corner of Europe dates back centuries.

    Read More
  • 1/2022/ Metsä Fibre

    Targeting completely fossil-free raw materials

    ​Metsä Group’s objective is that all the raw materials it uses in its products will be fossil-free by 2030.

    Read More