Systematic development of pulp mills

​The uptimes of all of Metsä Fibre's pulp mills are considered to be excellent as a result of effective predictive maintenance and correctly timed investments. Reliability, delivery consistency and consistent quality are ensured through long-term life-cycle planning.

11/2018 TEXT: TIMO NYKÄNEN, PHOTOS: METSÄ GROUP

Each of Metsä Fibre’s four pulp mills has its own life-cycle plan, which includes the necessary investments, development areas and major overhauls required over the next ten years. The plans are drafted in order to ensure the mills run without disruptions.

“We update the life-cycle plan annually. In addition, we draft a rolling PTS plan, which is a more detailed development programme for the next three years. It is used to prepare the action plan and annual maintenance stoppage plan for each year”, says Camilla Wikström, SVP, Production at Pulp Business of Metsä Fibre.

According to her, the life-cycle plan is a dynamic “living document”, which is not only systematically followed during the daily maintenance functions at the mills, but is also continually updated. High uptimes at mills allow the production levels to be constantly improved and products to be delivered consistently and reliably to customers. It also ensures consistently high product quality, cost and environmental efficiency and good occupational safety in production.

“The long-term plan helps us consider what actions should be taken during the life-cycle, in order to increase capacity and maximise output from the mills. This also includes the development of energy efficiency and environmental performance”, says Wikström.Systematic development of pulp mills

Correct timing is essential

An important element of the life-cycle plan are the annual maintenance stoppages, which is when the carefully scheduled maintenance procedures and repairs are to be performed. Stoppages are a vital part of predictive maintenance in order to ensure that the mills operate without disruptions. Most recently, for example, production at the Rauma mill was halted for approximately a week in order to replace the automation system for the pulp mill and drying line, which was the largest single maintenance procedure completed during the stoppage.

“The Joutseno mill is a good example of the benefits of the systematic life-cycle approach. When compared to the situation five years ago, we have been able to significantly increase the usability of the mill. We have done the right things at the right time and now Joutseno is among our top mills in terms of usability.”

The Kemi mill, in turn, is Metsä Fibre’s oldest mill and is approaching the end of its life-cycle. The mill has been renovated in phases and its technology is mainly from the 1980s. Continuing until the summer of 2019, a preliminary assessment project titled Polar King is currently underway, which is used to determine if the mill is to either be modernised or completely replaced with an entirely new bioproduct mill.

Systematic development of pulp mills

Competitive advantage from outsourcing

Metsä Fibre, together with Caverion Industria, established the service company Botnia Mill Service (BMS) in 1997 to handle daily maintenance. BMS is responsible for the maintenance and project management, planning, technical maintenance and various project implementations for the mills. The cooperation has helped keep costs under control and to develop the maintenance procedures of the mills.

“We also work together with BMS to update our life-cycle plans and prepare the predictive maintenance lists together, among others. We have a long-term and close strategic partnership, which has been very effective in supporting improving the usability and continuous development of the mills”, says Wikström.Systematic development of pulp mills

Related articles

  • Finnish sawn timber is a sustainable choice

    4/2019/ Sawn timber

    Finnish sawn timber is a sustainable choice

    ​Thanks to sound forest management, Finland’s forests are growing by roughly 20 per cent more than they are being used. This is why Finnish sawn timber is a sustainable and resource-smart solution.

    Read More
  • We utilize the properties of northern wood

    4/2019/ Sawn timber

    We utilize the properties of northern wood

    ​Metsä Fibre possess solid and long-standing know-how in the conversion of northern softwood. We know our raw material and the opportunities it offers inside out. 

    Read More
  • Premium sawn timber from northern wood

    4/2019/ Sawn timber

    Premium sawn timber from northern wood

    ​Northern sawn softwood offers extremely advantageous strength qualities in relation to weight, due to which it is well-suited for use in load-bearing structures.  In terms of its appearance, northern wood is consistent, and it is easy to process and treat in the preferred manner. 

    Read More
  • Antti Kiljunen is Metsä Fibre's new CFO

    3/2019/ Metsä Fibre

    Antti Kiljunen appointed Metsä Fibre's CFO

    ​Previously SVP, Strategy at Metsä Fibre, Antti Kiljunen was appointed CFO as of 14 January 2019.

    Read More
  • Polar King project proceeds as planned

    3/2019/ Metsä Fibre

    Polar King project proceeds as planned

    ​If all preconditions are met, a new bioproduct mill will start up in Kemi during the year 2022. So far, the results of the prefeasibility study look promising. This was the encouraging message of a public event organised on December 18 in Kemi, where Metsä Fibre gave an update on the progress of the project to an audience of around 200.

    Read More
  • Metsä Fibre awarded with supplier excellence award in China

    3/2019/ Metsä Fibre

    C&S presents Metsä Fibre with supplier excellence award in China

    ​Metsä Fibre has received a Supplier Excellence Award from C&S, one of China’s major tissue producers, for being the company’s Partner in Excellence.

    Read More
  • 3/2019/ Pulp

    Innovative products from cellulose fibre

    ​Established in 2011, Chemarts is a Finnish collaboration between two Aalto University schools, the School of Chemical Engineering (CHEM) and the School of Arts, Design and Architecture (ARTS). At its heart, Chemarts is the study of bio-based materials and its main aim is to inspire young students from design and technical schools to get interested in wood-based fibres and to explore biomaterials together. Chemarts was also conceived to consider how design can be a strategic tool when developing new cellulose-based products or new materials.

    Read More
  • Partnership between Asia Symbol and Metsä Fibre is deepening

    3/2019/ Pulp

    Combining forces for a sustainable edge

    ​As demand for high-quality paper products in China and Asia increases, the partnership between Metsä Fibre and Asia Symbol is set to deepen.

    Read More
  • Metsä Spring together with Itochu are shaping the new textile fibre future

    3/2019/ Pulp

    Shaping the new textile fibre future

    ​Metsä Group’s innovation company, Metsä Spring, and the Japanese Itochu Corporation, have established a joint venture to build and operate a unique test plant. The hope is that this pilot will kick-start a new revolution in future ecological textile fibre production.

    Read More
  • Fresh fibre is helping to tackle the recycling challenge in China

    3/2019/ Metsä Fibre

    Fresh fibre to tackle recycling challenge

    ​Since mid-2017, China’s government has moved to ban a wide range of imported waste, from scrap metals to scrap paper, upending a recycling industry that had thrived since the mid-80s, transforming the world’s rubbish into usable materials when raw materials have been cost-prohibitive.

    Read More
  • Metsä FIbre participates in the Shanghai Pulp Week 2019

    3/2019/ Pulp

    Metsä Fibre participates in the Shanghai Pulp Week 2019

    Come and visit us on 20 March at Shanghai Pulp Week Annual Meeting or on 21 March at Hawkins Wright Shanghai Symposium.

    Read More
  • Antti Kiljunen and Risto E.J. Penttilä discuss business success factors under various scenarios.

    3/2019/ Metsä Fibre

    Possible worlds

    ​In an uncertain world, it can be helpful to prepare for various emerging outcomes. We asked Antti Kiljunen from Metsä Fibre and Risto E.J. Penttilä from the Nordic West Office consultancy firm to discuss business success factors under various scenarios.

    Read More
  • Metsa Fibre and Ahlstrom-Munksjo have unique safety collaboration in auditing

    2/2019/ Metsä Fibre

    Metsa Fibre and Ahlstrom-Munksjo have unique safety collaboration in auditing

    This is a unique form of collaboration among the Pulp and Paper industry with the target of promoting the safety work within the industry.

    Read More
  • Arja Suominen discusses the meaning of trust in Finland

    2/2019/ Metsä Fibre

    A nation built on trust

    ​The expression “let’s shake on it” goes to the heart of what it means to be Finnish. We are a nation built on trust. Our word is our bond, and oral agreements may well be binding in a legal sense. We say what we mean, committing ourselves to the settled undertaking and making sure that it progresses systematically.

    Read More
  • The demand for quality paper products grows in China

    2/2019/ Pulp

    Paper-centric lifestyle

    ​As living standards in China rise, the demand for quality paper products grows.

    Read More
  • Sustainable pulp excellence, Asia, Harri Vertanen

    2/2019/ Metsä Fibre

    Sustainable excellence

    ​The year 2019 has started at full speed here in Shanghai, and I hope it will prove to be an excellent year for both us and our valued customers. As our CEO, Ismo Nousiainen, stated in the previous issue of Echo Magazine, we are focusing on excellence in our strategy.

    Read More
  • Metsä Fibre's logistics for pulp

    3/2019/ Metsä Fibre

    Reliable deliveries

    ​Metsä Fibre is the world’s leading supplier of bleached softwood market pulp, with an annual production capacity of around 3.25 million tonnes. Efficient and reliable logistics are a crucial part of the company’s pulp production chain. Some 62 per cent of the pulp produced by Metsä Fibre is exported.

    Read More
  • 1/2019/ Metsä Fibre

    For the forest

    The forests of Finland are satisfying a growing need for responsibly produced, renewable materials used in a wide variety of products. The Pro Nemus (“For the Forest”) visitor centre adjoining Metsä Fibre’s new bioproduct mill in Äänekoski provides an overview of the broad range of opportunities that the forest provides, with exhibits illustrating the bioproduct mill ecosystem, the products of the forest industry and the process of delivering them to customers around the world.

    Read More
  • 1/2019/ Pulp

    Metsä Spring and Itochu invest in test plant for wood-based textile fibres

    ​Metsä Group’s innovation company Metsä Spring Ltd. and Japanese Itochu Corporation have established a joint venture, investing approx. EUR 40 million in building and operating a test plant to demonstrate a new technology for converting paper-grade pulp into textile fibres.

    Read More
  • 1/2019/ Pulp

    Charting the customer experience

    Metsä Fibre’s annual RADAR customer satisfaction survey for its pulp and biochemical customers has been completed for 2018.

    Read More
  • 1/2019/ Metsä Fibre

    Progress in the Polar King project

    ​A renovation project launched in May by Metsä Fibre at its pulp mill in Kemi, northern Finland, has entered a preliminary study stage that will continue until summer 2019.

    Read More
  • Towards the best reliability, Mikael Lagerblom

    12/2018/ Metsä Fibre

    Towards the best reliability

    ​Metsä Fibre’s vision is that our customers value us as their preferred supplier for high-quality bioproducts and services that create added value for their business. The vision is based on reliability– reliability as in being a trustworthy partner or as in performing consistently well. As we all know, trust is something that needs to be earned.

    Read More
  • Maria Laamanen talks about plastic

    12/2018/ Metsä Fibre

    A trendy tote bag heralds the twilight of the plastic era

    ​Let me begin with a confession. I feel slightly ashamed to walk around downtown Helsinki with a plastic carrier bag nowadays, and if my shopping is small enough, then I fold up the bag and hide it under my arm. Plastic carrier bags have become rather embarrassing.

    Read More
  • Systematic development of pulp mills

    12/2018/ Pulp

    Systematic development of pulp mills

    ​The uptimes of all of Metsä Fibre's pulp mills are considered to be excellent as a result of effective predictive maintenance and correctly timed investments. Reliability, delivery consistency and consistent quality are ensured through long-term life-cycle planning.

    Read More