Test run approaching at the Rauma sawmill

​The Rauma sawmill is preparing for its production test run. The buildings of the world’s most modern sawmill have been completed, installations are progressing swiftly, and systems are being tested. The production test run will begin in the spring, and production will start up in the third quarter.

3/2022

​The Rauma sawmill project is moving forward according to the master plan and schedule.

The installation of machinery is progressing in log grading. We are currently constructing the control room, and HEPAC work is underway. In the sawmill infeed and debarking department, the first debarking machine has been installed, and the second will be in place by the end of the month. The installations of other machinery and equipment have advanced, and testing is about to begin. The sawmill infeed will have two lines to ensure efficient sawing and a good debarking result.

The machinery and conveyors for the sawline have been installed. We are now testing the interfaces and preparing for the sawline’s test run. Using completely new technology, sawing speed can reach 250 metres per minute.

The installation of equipment for green sorting is well underway on both green sorting lines and the sticking and stacking lines. We are also performing interface testing. The installation of stick and wagon handling is progressing.

Seven pairs of chambers and chutes are now in place at the kiln drying departments. We are constructing canopies for sawn timber, installing equipment and performing tests. The construction of the large kiln drying departments is a big project that will continue until the spring. 

Equipment installations are progressing, and system testing is underway at the grading lines for dried sawn timber. The lines will feature new technology, including machine vision, intelligent control and robotics.

The mechanical installations in packaging and departure logistics are now complete, and we are finalising electrification. The testing of automated loading has begun.

Regarding the ERP and control room systems, we are now testing the process stages.


Towards the production test run

Around 400 people are currently working on the Rauma sawmill site.

“Work is running at full speed, and the production test run is approaching. We are preparing for the sawmill’s start-up throughout the production chain. This has already involved immense joint efforts from us and our partners,” says Harri Haapaniemi, Project Director.

The team of operators preparing to run the Rauma sawmill has been training on the site since January. Trained for control room work, the operators will start up the sawmill in the autumn of 2022. 

“They have really been looking forward to starting up their sawmill,” Haapaniemi says.  “The construction project is nearing its final stretch, and production of sawn timber will be launched in the third quarter as planned.”


WAtch a video:

Related articles

  • Walking in the woods

    5/2022/ Metsä Fibre

    University projects important for product development

    ​Universities and research institutions are important partners in innovation and product development processes. Cooperation is a two-way street that benefits both parties.

    Read More
  • Family-playing-game-on-wooden-terrace

    5/2022/ Sawn timber

    Pressure-impregnated wood for impressive and sustainable garden and patio structures

    ​In Europe, a comfortable garden with a patio is an essential part of a functional home. The trend is also catching on in the Nordic countries. The garden has become something people want to invest in.

    Read More
  • Gluelam beams modern building

    4/2022/ Sawn timber

    Metsä Fibre is the preferred supplier for Japanese glulam producers

    ​Glulam beams are used extensively by the Japanese building construction industry. Flexibility and durability make them ideal for earthquake-prone areas.

    Read More
  • Joutseno morning meeting

    4/2022/ Pulp

    Mill speed is planned together

    ​Metsä Fibre mills hold a daily morning meeting to get an overview of the situation at the mill. The meetings play an important role in mill management.

    Read More
  • Vilppula sawmill

    4/2022/ Metsä Fibre

    Metsä Fibre adopts the 5S method

    ​In 2020, all Metsä Fibre sawmills and pulp mills began deploying the 5S method. It is a methodology for steering daily work that gradually turns common, proven practices into standardised operating methods. Work becomes faster, more efficient and more meaningful.

    Read More
  • Bohui papermill

    4/2022/ Pulp

    Bohui Paper seeks sustainable competitive advantages

    ​One of China’s top papermakers, Bohui Paper, sees new opportunities in the shift away from plastic. It credits Metsä Fibre with inspiring its pre-sale and post-sale service.

    Read More
  • Mount Kayasan

    3/2022/ Sawn timber

    Softwood suits Japanese post and beam

    ​The traditional architecture of Japan employs the wooden post and beam structure. This construction method is used in everything from small homes and tea ceremony houses to large temples and shrines.

    Read More
  • Kemi_Q1

    3/2022/ Pulp

    VIDEO: Bioproduct mill moving to the installation phase

    ​Pile driving and earthworks are nearly complete at Metsä Fibre’s Kemi bioproduct mill. The installation of concrete elements, laying of ground slabs and mechanical installations are widely underway. As spring progresses, more and more of the site will move to the installation phase.

    Read More
  • Rauma_Q1

    3/2022/ Sawn timber

    VIDEO: Test run approaching at the Rauma sawmill

    ​The Rauma sawmill is preparing for its production test run. The buildings of the world’s most modern sawmill have been completed, installations are progressing swiftly, and systems are being tested. The production test run will begin in the spring, and production will start up in the third quarter.

    Read More
  • Toilet paper roll

    3/2022/ Pulp

    Turkey sees steep growth in pulp demand

    ​Turkish tissue paper producers are ramping up production and buying increasing amounts of pulp on the international market. Alongside domestic consumption, exports of tissue products to the neighbouring region are growing steeply.

    Read More
  • Tytti Peltonen

    3/2022/ Metsä Fibre

    Lobbying for the forest industry

    For the first time, climate change and biodiversity have been made a priority on the EU’s agenda. Current and proposed amendments to legislation will also have a considerable impact on the forest industry. Tytti Peltonen,
    Metsä Group’s VP, Corporate Affairs, at the European Union tells about her work in Brussels.

    Read More
  • Rauma sawmill loading automation

    3/2022/ Sawn timber

    Fast and safe automated loading at the Rauma sawmill

    Automated loading at Metsä Fibre’s Rauma sawmill is a first for the sawmill industry. Conventional forklift loading will become obsolete when packages of sawn timber pass through packaging and dispatch for loading onto trucks without human contact. 

    Read More
  • timber sawn

    2/2022/ Sawn timber

    Timber for Saudi construction boom

    ​Nordic wood is crucial for the quality-driven construction boom in Saudi Arabia.

    Read More
  • Timo Teras

    2/2022/ Pulp

    Finnish pulp has a bright future

    ​For more than 50 years, Timo Teräs has worked as a market researcher and consultant in the forest and pulp industries. Today he is focused on the vital solutions that that support sustainable development.

    Read More
  • 2/2022/ Metsä Fibre

    Resource efficiency and a fossil-free future

    Metsä Group’s objective is that all its production side streams will be utilised 100 per cent as either materials or energy. 

    Read More
  • 2/2022/ Metsä Fibre

    Aiming for an increasingly responsible way of working

    Metsä Fibre, as part of Metsä Group, implements a large-scale ethics barometer survey. The goal of the survey is to study how the personnel feel the company’s Code of Conduct is being implemented in practice. 

    Read More
  • 2/2022/ Metsä Fibre

    Aiming for zero accidents

    Metsä Fibre, like the whole of Metsä Group, has the target of preventing all accidents. Safety is the most important part of professional skills at Metsä Fibre. We want to ensure that every Metsä Fibre employee and the employees of our partners are able to return from work healthy. 

    Read More
  • 2/2022/ Metsä Fibre

    Systematic reduction of water use

    Metsä Fibre’s objective is to reduce the use of process water at its pulp mills by 25 per cent per product tonne from the 2018 level by 2030, in line with the Group-wide target. 

    Read More
  • 2/2022/ Metsä Fibre

    Towards fossil-free mills

    Metsä Group’s objective is that it will no longer use any fossil fuels in its production by 2030 and will therefore not produce any fossil carbon dioxide emissions.

    Read More
  • 1/2022/ Metsä Fibre

    Targeting a sustainable supply chain

    Metsä Fibre’s goal is that all its suppliers will operate according to the environmental, social and economic responsibility requirements jointly set at Metsä Group by 2030. 

    Read More
  • 1/2022/ Metsä Fibre

    Targeting the full traceability of all raw materials

    Metsä Fibre’s objective is that 100 per cent of the raw materials used in its production would be traceable. The main raw material used in production is, of course, wood. Metsä Fibre, like the whole Metsä Group, knows the origin of the wood it uses. 

    Read More
  • 3D-rendered-consumer-packaging

    1/2022/ Pulp

    Broad partner network around Äänekoski bioproduct mill

    ​An essential part of Metsä Fibre’s unique bioproduct mill concept is the creation of industrial ecosystems.

    Read More
  • Metsä Svir sawmill

    1/2022/ Sawn timber

    Metsä Svir is known for the high-quality products

    ​The Metsä Svir sawmill in northwest Russia is a state-of-the-art production site, but timber innovation in this corner of Europe dates back centuries.

    Read More
  • 1/2022/ Metsä Fibre

    Targeting completely fossil-free raw materials

    ​Metsä Group’s objective is that all the raw materials it uses in its products will be fossil-free by 2030.

    Read More